The Framing Equipment Specialists

Underpinners Level 2

   Click on picture to see enlargement

New From Alfamacchine

Miningraf Mp Multichanannel

This NEW machine has evolved from the highly successful Memory Program Machine. It has the same ease of use, speed and precision. It has 5 different wedge magazines containing wedges of different sizes 5mm, 7mm, 10mm, 12mm and 15mm enabling wedge insertion of different sizes in the same operating cycle, either stacked or singularly

Movie loading - please be patient! It will take a few minutes.

Key Benefits

• This computerised underpinner has been designed with both the large volume photo frame, mirror framer and picture framer manufacturer in mind or just a high quality gallery framer.
• If speed and quality of corner joining, and ease of operating the underpinner, is important to you then this is the machine for you.
• The simplest of control boxes will remember up to 1400 moulding details so there is no need to reset
  machine for the same profile time after time.
• It comes with positive vertical and horizontal clamp which firmly locks moulding down and against fence for perfect frame corners every time.
• Angle adjustment fence to allow for poor cutting angles Computer minimizes operator error and no more wasted frames.
• No need to change magazine from one size to another
• Moulding width 10mm to 100mm
• Moulding Height 5mm to 80mm

Pricing

      Click on picture to see enlargement

Cassese 3099 ULTRA
Computerized underpinner by Cassese. Designed for the medium to gallery type picture framers, with its unique
horizontal and vertical clamping system, first stage wedge insertion, then second stage - fully driving the wedge into moulding - assures the best quality finish. No resets necessary as computer memorizes 1000 different profile position

Key Benefits

• Powerful double action rebate clamp for marrying the frame corners together for the tightest of joints.
• Angle adjustment fence for + or – 90 degrees to compensate for poor cutting and irregular moulding
• No vertical adjustment required
• Comes with bar code software to receive bar code scanner
• Number of wedge position 6 and 9 wedges per position
• Moulding width 3mm to 130mm
• Moulding height 7mm to 90mm

Pricing

                Click on picture to see enlargement

 Cassese 4095 ULTRA

Unique computerised underpinner with rotating barrel, holds up to 5 sizes of wedges. Designed for medium to gallery type framers. Ideal underpinner for moulding requiring several sizes of wedges per operation. Computer memorizes up to 1000 moulding profiles

Key Benefits

• Powerful double action rebate clamp for marrying frame miters  together for the tightest of joints
• Angle adjustment fence for + or – 90 degrees to compensate for poor cutting
• No vertical adjustment required
• Comes with bar code software to receive bar scanner

Pricing

              Click on picture to see enlargement

Cassese CS299M ULTRA air operated underpinner

Suitable for Bespoke , Gallery and medium size framers.

Key Benefits

• Unique double action foot pedal for clamping and insertion of the wedges.
• Button on top of driver handle serves for precise braking position so that the wedge can be stacked.
• No top pressure clamp adjustment required for moulding up to 50mm
• No limit of wedge position
• Angle adjustment fence for true + or - 90 degree angle
• Powerful double action rebate clamp for marrying the corner together for the
  tightest of frame joints
• No air pressure adjustment needed for soft to hardwood.
• Moulding width 5mm to 130mm
• Moulding height 7mm to 90mm
   

Pricing

     Click on picture to see enlargement

Alfamacchine MEMORY 10

Very fast machine 399 frames per hour for moulding section 10mm to 100mm,ideal for low to high production framers. Full specification sheet available.

Key Benefits

• This computerised underpinner has been designed with both the large volume photo frame, mirror framer and picture framer manufacturer in mind or just a high quality gallery framer.
• If speed and quality of corner joining, and ease of operating the underpinner, is important to you then this is the machine for you.
• The simplest of control boxes will remember all moulding details so there is no need to reset
  machine for the same profile again.
• It comes with positive vertical and horizontal clamp which firmly locks moulding down and against fence for perfect frame corners every time.
• Angle adjustment fence to allow for poor cutting angles Computer minimizes operator error and no more wasted frames.
• Number wedge Position 10
• Moulding width 10mm to 100mm
• Moulding Height 5mm to 80mm

Pricing

Click on picture to see enlargement

Taurus 292d Underpinner

Ideal underpinner for photo frame manufacture very fast

Key Benefits

• Insert two different wedges simultaneously
• No front horizontal clamp which allows the user to position the frame corner at speed up and against fence so increasing the number of frames per hour.
• Number wedge position 2
• Moulding width
• Moulding Height Front head 17mm to 110mm
• Moulding Height Rear head 5mm to 98mm
• Front & Rear Centre 12mm
• Very fast photo underpinner 450 frames per hour for
  moulding section 12mm to 50mm

Pricing

Taurus 2kd Underpinner

Ideal underpinner for photo frame manufacture...

Key Benefits

• Advanced twin heads insert 2 Pnu nails simultaneously in different sizes
• 8 rapid operating modes giving optimum flexibility & speed ensure true stacking & tightest joint
• Adjustable guide fences for square, octagonal and hexagonal head
• Hammers are precision manufactured from high quality steel
• Quick and easy to change fastener size with patented steel reusable steel top loaders
• Bench mounted or fully adjustable stand available
• Surround boards of varying sizes available
• Easy to set stop positions
   

Pricing

Click on picture to see enlargement

Alfamacchine mini 4p 3p 125 mm

Ideal underpinner for small to medium size picture framer

• The wedge insertion mechanism is on a movable carriage controlled by the operator, which
  allows you to move between first, second and third position at speed.
• Dual foot pedal control for clamping the corner perfectly tight and then inserting the wedge fully.
• Horizontal clamp to hold corner tightly together for a perfect joining.
• Adjustable fence to compensate for poorly cut corners.
• Pneumatic valve for speed of reloading wedges.
• Different shape pressure pads to allow for the contours of moulding.
• Soft moulding device to adjust the air pressure during operating.
• Number Wedge Position 3
• Moulding Height Width 10mm - 125mm
• Height 6mm - 80mm
   

Pricing

Click on picture to see enlargement

Alfamacchine Mini 44 underpinner

Ideal for bespoke and medium  framer

Key Benefits

• Comes built onto a tilting stand.
• The two-stage foot switch first operates the moulding rebate clamp.
• Second pressure brings down the top pressure pad and locks the wedge insertion mechanism wherever it is placed.
• The overall travel range is between two adjustable stops.
• Moulding width 10mm to 120mm
• Moulding height 7mm to 80mm
   

Pricing

  Click on picture to see enlargement

Cassese cs486 Underpinner

Ideal underpinner for the gallery to medium framer

Key Benefits

• This machine will insert wedges in 5 position and stack 5
  wedges per position.
• It has a very easy keyboard to memorise the firing position and how many wedges per position.
• Horizontal and vertical clamping system, which allows the framer visually to check the two corners alignment and to re-adjust the corners before confirming the firing operation.
• unique two stage wedge insertion allows the wedge to be gently inserted into the moulding preventing the corner from coming apart giving the best quality finish everytime.
• During the machine cycle if it runs out of wedges it will stop and ask the framer to refill the machine with wedges and return to its original position.
• Powerful double action rebate clamp for marrying the frame corner together for the tightest of corners .
• Angle adjustment fence for + or – 90 degrees to compensate for poor cutting.
• No vertical adjustment required
• Comes with bar code software to receive bar scanner.
• Machine works in manual or automatic mode.
• Number wedge position 6 and 9 wedge per position
• Moulding width 5mm to 130mm
• Moulding height 7mm to 90mm
   

Pricing

Back to top